How to Use Your Lange Lift Table: Battery and Air Lift Tables
Lange Lift offers a complete line of lift tables built for any application. In our last post, we covered the operation of our manual lift tables and electric lift tables. Read on to see operation procedures for Lange Lift battery lift tables and air lift tables.
Lange Battery Lift Tables
Lange battery lift tables enable improved ergonomics and easy adjustment anywhere, with an onboard 12V deep cycle battery, DC Motor, and battery charger. Charging the unit is easy, just plug it into a 120V AC outlet with an industrial grade extension cord, and the unit will be fully charged and ready in 8-10 hours. Easy to read indicator lamps on the battery charger will alert you to its status, and charging will cease when the unit is fully charged. For maximum life, it’s important to not operate the lift table while it is charging.
To lift your Lange battery lift table, simply push and hold down the lift button until the deck has reached its maximum raised height of 45″ from the top of the deck to the floor. The built in bleeding mechanism ensures that over raising will not damage the table and allow it to settle at 45″. To lower, push and hold down the lower button. The lift table will lower until the deck has reached its minimum lowered height of 27″, or until the button is released. A lift table under load will lower more quickly than an empty lift table, so be sure to exercise caution. Adjust the onboard flow control by hand to adjust lowering speeds, and always use proper safety precautions required by your environment.
Deck rotation is accomplished as with any Lange Lift table, by loosening the lock handle under the deck and rotating the deck 360º degrees in either direction at any height. Tightening the lock handle will lock it in place, although some movement is intended to protect the bearing. Do not over-tighten the lock handle, and position the lock handle arm towards the floor to prevent possible damage.
On a flat surface that is free of debris, you can lock your lift table to the floor. Use your foot to push down on the large pedal until it locks. To release, press up on the small pedal until the large pedal snaps up.
Lange Air Lift Tables
Lange air lift tables allow ease of operation without requiring an electrical source. To power your Lange air lift table, connect the lift to an air source with a recommended air output of 80 PSI @ 50 CFM. To lift the deck, tilt back and hold down the air valve pedal until the deck has reached its maximum raised height. To lower, tilt forward and hold down the air valve pedal. Adjust the onboard flow control by hand to adjust lowering speeds, and always use proper safety precautions required by your environment.
Deck rotation and floor locking are accomplished in the same manner as all Lange lift tables. These simple controls, consistent across all types of Lange lift tables, ensure ease of use by everyone in the facility, keeping workers free from injury and enhancing their ability to do their best work.
Contact us today to learn more
Since 1934, Lange Lift has been manufacturing high quality hydraulic lift tables, scissor lifts, and custom lift products for material handling in a wide array of industries across the world. Contact us today to learn more about what our great products can do for your business.