Download the latest standard Lange Lift Product Catalog. For all custom & modified product inquiries, please call 1-800-588-0577 or email us through the Contact Us section of the website.
1,000 pound capacity lift table with a ball transfer deck. There are adjustable end stops on both ends of the deck and fixed stops on both sides of it. The stops give you the ability to move the table with a load on top of it. The adjustable end stops in conjunction with the ball transfer top allow you to easily transfer the load off of the lift.
Below you will see a video presentation of the basic operations of this specific lift.
This is just one example of the different features we can add to our standard line of lift tables to meet your specific needs.
Custom Lift - Serial #25991
1,000 pound capacity telescopic lift table mounted on casters. Features a rubber top with indexing deck arms that lock in place. The range of the deck arms are 21" to 42" in diameter.
This lift also features foot switch opereated variable speed powered deck rotation adjustable from 0-4 RPM in both clockwise and counterclockwise directions at all levels of elevation.
The lift operation of this unit is manual foot pump operated for both raising and lowering. The deck heights range from 16" to 30".
Custom Lift - Serial #25860
1000 pound capacity electric over hydraulic operated lift and tilt unit. It features a 36" diameter rubber coated deck with special tooling so that components can be mounted securely to the lift.
The manual deck rotation has detents at every 90 degree interval. The deck is capable of tilting 90 degrees from horizontal to vertical.
Powered controls are operated by a hand held pendant (not shown).
Custom Lift - Serial #25590
This 2000 pound capacity lift features a stainless steel bolt on deck with 45 degree manual tilt mounted on poly on iron casters. The tilt function is operated by a hand crank actuator mounted below the deck.
The floor lock on this lift automatically engages when the the lift is raised from it's lowered position.
Custom Lift - Serial #26012
1000 pound capacity pnuematic powered lift table mounted on phenolic casters. The up and down lift function is pnuematic over hydraulic power controlled by a mounted foot pedal.
Deck rotation is also powered pnuematically by a separate foot pedal. Speed of rotation can be adjusted from 1-10 RPM while in use in both directions. The deck is 36" in diameter with a height ranging from 24" to 36".
Custom Lift - Serial #25158
1,000 pound capacity Modified Lift Table based on our standard L-130. This lift was designed to be utilized as an assembly and test fixture manipulator with special tooling on the deck. This lift allows for ease of assembly at a number of positions.
The lift has 30" inches of vertical travel as well as a full 90 degree tilt from horizontal to vertical position. The deck can be fully rotated 360 degrees continuously. All of the functions on this lift are independent of one another and powered hydraulically by a 120V AC power unit. The tilt and rotation of the lift is controlled by a hand-held pendant. The vertical travel is foot switch controlled. The electrical & hydraulic unit is enclosed in a waterproof control box.
Custom Lift - Serial #25002-05
300 pound capacity Manually Actuated Scissors Lift. It was designed to be incorporated into a system used to insert and remove military aircraft radar units.
The lifts are mounted on nylon casters (not shown) for ease of mobility. The unit is completely environmentally sealed for outdoor storage. The actuator is manually operated by using a ratchet wrench.
The lifts are painted specially to meet United States Military specifications.
Custom Lift - Serial #24859
1,500 pound capacity Custom Tilter used to simultaneously tilt and raise a wheel mounted basket of parts for the assembly operator. This units unique geometry minimizes the travel of the basket into the operator's workspace for easy unloading.
Custom Lift - Serial #23736-39
These 1000 pound capacity Lange Lift Die-Tables are modified with a manual tilt-top deck. The deck can be rotated 360 degrees (at any height) and tilted from 0 to 45 degrees (at any height) with a manual crank handle. The deck also features adjustable end-stops on three sides and slots for tooling and clamps.
(c) Lange Lift Company (a div. of Hevi-Haul International, Ltd.),
-
All rights reserved.
1,000 pound capacity telescopic lift table mounted on casters. Features a rubber top with indexing deck arms that lock in place. The range of the deck arms are 21" to 42" in diameter.
1000 pound capacity electric over hydraulic operated lift and tilt unit. It features a 36" diameter rubber coated deck with special tooling so that components can be mounted securely to the lift. 
This 2000 pound capacity lift features a stainless steel bolt on deck with 45 degree manual tilt mounted on poly on iron casters. The tilt function is operated by a hand crank actuator mounted below the deck. 
1000 pound capacity pnuematic powered lift table mounted on phenolic casters. The up and down lift function is pnuematic over hydraulic power controlled by a mounted foot pedal. 
1,000 pound capacity Modified Lift Table based on our standard L-130. This lift was designed to be utilized as an assembly and test fixture manipulator with special tooling on the deck. This lift allows for ease of assembly at a number of positions. 
300 pound capacity Manually Actuated Scissors Lift. It was designed to be incorporated into a system used to insert and remove military aircraft radar units. 
1,500 pound capacity Custom Tilter used to simultaneously tilt and raise a wheel mounted basket of parts for the assembly operator. This units unique geometry minimizes the travel of the basket into the operator's workspace for easy unloading.
These 1000 pound capacity Lange Lift Die-Tables are modified with a manual tilt-top deck. The deck can be rotated 360 degrees (at any height) and tilted from 0 to 45 degrees (at any height) with a manual crank handle. The deck also features adjustable end-stops on three sides and slots for tooling and clamps.
