View #2 |  This is a view of the table in the fully lowered position. In this view the orientation of the power unit under the deck can be seen, as well as the location of the electrical inlet. Notice the guarded foot control switch. |
|
View #3 |  This is another view of the table in the partially raised position which shows the base framework. |
|
View #4 |  This is a view of the front of the table in its fully extended position (60 degrees). |
|
View #5 |  This is a view of the table from the back side of the lift. In this view you can see the single hydraulic cylinder, the underside of the deck and the steel frame base. |
|
|
|
|  | Custom Upender/Tilter Serial #17914 |
 | | 700# capacity hydraulic/electric 60 degree Tilt-top table/Upender with a single acting hydraulic cylinder and ball transfer top. Deck size is 36” wide x 42” long with a 13” retaining lip on one side. Modifications can be made to fit your specific application. |
|
|
|
| Model: |
|
|
| 700# capacity 60 degree Tilt-Top Table/Upender with ball transfer deck |
|
|
| Capacity: |
|
|
| 700# |
|
|
| Tilt Angle: |
|
|
| 0 to 60 degrees |
|
|
| Deck Sizes: |
|
|
| 39" L x 42" W |
|
|
| 44" L x 12" W |
|
|
| Reach: |
|
|
| 14.80" |
|
|
| Lip Height When Tipped: |
|
|
| 28.14" |
|
|
| Deck Height When Lowered: |
|
|
| 26.38" |
|
|
| Power: |
|
|
| 120 VAC hydraulic power unit |
|
|
| Controls: |
|
|
| Guarded foot control switch (on 10' cord) |
|
|
| Other Modifications: |
|
|
| - Custom paint color - blue
|
|
|
| Up = 20 seconds |
|
|
| Down = 15 seconds (adjustable) |
|
|
|
|
|
;)
;)
;)
;)
;)
